Shopping Cart


Your shopping bag is empty

Go to the shop

Fixident Paintless Dent Repair Puller Kit



Repair dents without costing you a lot of money

  • Dents of cars, bikes, refrigerators, washing machines or other similar metal surfaces
  • Efficiently removes dents without scratching the paint
  • Can mend dents of small, medium sizes. Can fix bigger dents
This paintless dent remover kit has
  • 12 sizes of different dent-pulling tabs
  • Dual T-bar sledgehammer configurations
  • Accessory glue gun with 2 industrial-grade silicone glue sticks




Extra hassle


Different dent-pulling tabs

Quick Fix




Remove Dents At Home!

It is an easy-to-use device with which you can fix dents easily at your home without the hassle of visiting a workshop or paying for one.

Fixes Small & Medium-Sized Dent

Dintofix comes with Rubber Tabs of various shapes and sizes to fix dents in your car. It can fix small and medium-sized dents easily.

A Professional's Tool

It is a professional tool that garage owners and workshops can also use for repairing the car dents.

FIxDent Paintless Dent Repair Puller Kit

  • VERSATILE PAINTLESS DENT REPAIR KIT: Shining through as one of the best all-inclusive car dent puller kits that features two configurations of the same slide hammer T-bar (full-size dimension of 50cmx10cm). This is a complete paintless dent removal kit that includes: 12 different sized dent-pulling tabs, 2 industrial-grade silicone glue gun sticks, and one glue gun that comprehensively helps you tackle any dent or dint.
  • SAVE TIME, RESOURCES & MONEY: Count on FixiDent’s stainless steel-plated slide hammer T-bar to save both your time and money. Engineered to require minimum human effort while extracting dents, this dent removal kit for cars efficiently removes dents without scratching or marking your car’s paint. It is super easy to set up and use, or later dismantle and store.
  • FIXES ALL KINDS OF DENTS: The twin configuration of the T-bar gives the user the freedom to fix dents and dips, small or medium-sized dents, and use this versatile dent remover tool to cover dents on any part of your car, bike, scooter, refrigerator, dishwasher, etc. The various sizes of dent-puller patches allow you to exercise maximum pulling force on the dent’s surface area.
  • MULTIPURPOSE USE: This multifunctional paintless dent repair tool has various other applications all-around your house also. It can be used to effectively repair dents on refrigerators, washing machines, dryers, etc. These dent repair tools also can be used to fix the body of any motorcycle or bike. Though, make sure not to exceed the advised thickness of metal. It may not work on surfaces that have more than 4.5mm of thickness approximately.
  • USE ANYWHERE: This professional dent puller toolset is super affordable and can be used not only to use at home but also for using at auto-repair workshops or any second-hand car dealership stores. It can also be carried in your car’s bunk that you can even fix dents quickly while on long road trips or family trips.
  • How to use
  • Step 1: Spot the dent and rub it clean with rubbing alcohol to eliminate any traces of dirt or oil that might hinder the adhesion.
  • Step 2: Choose the appropriate dent-pulling stamp as per the width and depth of the dent. Use multiple stamps to enable proper pop-back.
  • Step 3: After selecting the rubber stamp, heat the glue gun and apply the melted glue on the designated side of the rubber stamp.
  • Step 4: Blow on the hot glue once and stick it exactly where the main depression on your surface is to wait until the glue dries.
  • Step 5: After the glue has dried, affix the dent puller onto the rubber stamp, lock it in place and pull with one sharp movement.
  • Step 6: Repeat steps 1 to 5 if the dent is still there or is a longer one.
  • Question 1: Will the hot glue damage the car’s paint?
    Answer: No, that is highly unlikely to happen. The silicone glue does not attain such a high temperature that it can harm your car’s paint job. Rest assured, you’ll be able to remove the glue when the dent has been repaired.
  • Question 2: Can the pulling tabs be used on a thicker metal surface like the metal safe?
    Answer: Yes and no. This product works very well on thinner metal surfaces like the metal sheet on a car or a bike. The pulling tabs will not work very well on very thick and rigid metal surfaces, such as in a metal safe or cast-iron structures.
  • Question 3: Does this tool work on bare, untreated metal surfaces?
    Answer: Afraid not. The product’s pull is the most effective over a treated metal surface than an untreated one. This is because untreated metal surfaces tend to has an uneven surface that can hinder the glue binding process, and the force from the slide hammer T-bar will not be evenly spread over it due to such an anomaly of the surface.
  • Customer Reviews

    Based on 2 reviews Write a review